|
ADAM-6000
Analog input modules supply many kinds of sources, such as thermocouple, RTD, Thermistor or general analog signals. These modules use the EIA RS-485 communication protocol, the industry’s most widely used bi-directional, balanced transmission line standard. They also support the Modbus/RTU protocol as the remote data transmission mechanism. Analog output modules can provide 1 channel to 4 channels to satisfy many kinds of application.
مشاهده اطلاعات...
Analog input modules supply many kinds of sources, such as thermocouple, RTD, Thermistor or general analog signals. These modules use the EIA RS-485 communication protocol, the industry’s most widely used bi-directional, balanced transmission line standard. They also support the Modbus/RTU protocol as the remote data transmission mechanism. Analog output modules can provide 1 channel to 4 channels to satisfy many kinds of application.
مشاهده اطلاعات...
7-ch Isolated RTD Input Modbus TCP Module
• I/O Type: 7 RTD • 10/100Based-T Ethernet • Supports multi-channel/multi-range • Pt 100/1000, Ni, Balco 500 • Wiring burn-out detect function
Display |
LED Indicators |
Status, Comm, Link, Speed |
Power Supply |
Power Requirement |
10~30 VDC |
Analog Input |
Channels |
7 (2 or 3-wired) |
Direct Sensor Input |
RTD (Pt, Balco, or Ni) |
Burn-out Detection |
Yes |
Channel Independent Configuration |
Yes |
Sampling Rates |
10 samples/second |
Resolution |
16-bit |
Input Impedance |
>10 MOhm |
Span Drift |
±25 ppm/°C |
Zero Drift |
±6 µV/°C |
CMR @ 50/60 Hz |
90 dB |
NMR @ 50/60 Hz |
60 dB |
General |
Watchdog Timer |
System (1.6 second) & Communication (programmable) |
Connector |
1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power) |
Temperature (Operating) |
-10~70 °C (14~158 °F) |
Humidity |
20~95 %RH |
Temperature (Storage) |
-20~80 °C (-4~176 °F) |
Interface |
10/100Base-T(X) |
Peer-to-Peer |
Yes |
GCL |
Yes |
Isolation Protection |
2000 VDC |
Communication Protocol |
Modbus/TCP, TCP/IP, UDP, and HTTP |
Communication Speed |
Ethernet: 10/100Mbps |
Comm. Distance |
Ethernet: 100 m |
Datasheets
|
ADAM-6015 Datasheet |
8-ch Isolated Thermocouple Input Modbus TCP Module with 8-ch DO
• I/O Type: 8 T/C & 8 DO • 10/100Based-T Ethernet • Supports multi-channel/multi-range • Provides default/customized web page • 2,500 VDC optical isolation
Display |
LED Indicators |
Status, Comm, Link, Speed |
Power Supply |
Power Requirement |
10~30 VDC |
Analog Input |
Channels |
8 differential |
Direct Sensor Input |
J, K, T, E, R, S, B Thermocouple |
Burn-out Detection |
Yes |
Channel Independent Configuration |
Yes |
Sampling Rates |
10 samples/second |
Resolution |
16-bit |
Input Impedance |
>10 MOhm |
Span Drift |
±25 ppm/°C |
Zero Drift |
±6 µV/°C |
CMR @ 50/60 Hz |
90 dB |
NMR @ 50/60 Hz |
60 dB |
General |
Watchdog Timer |
System (1.6 second) & Communication (programmable) |
Connector |
1 x RJ-45 (LAN) & 1 x plug-in terminal block (DO and power) & 1 x 20-pin connector to daughterboard (TC) |
Temperature (Operating) |
-10~70 °C (14~158 °F) |
Humidity |
20~95 %RH |
Temperature (Storage) |
-20~80 °C (-4~176 °F) |
Interface |
10/100Base-T(X) |
Peer-to-Peer |
Yes |
GCL |
Yes |
Isolation Protection |
2000 VDC |
Communication Protocol |
Modbus/TCP, TCP/IP, UDP, and HTTP |
Communication Speed |
Ethernet: 10/100Mbps |
Comm. Distance |
Ethernet: 100 m |
Digital Output |
Channels |
8 Open collector to 30V, 100 mA max. load |
Power Dissipation |
300 mW for each module |
Datasheets
|
ADAM-6018 Datasheet |
12-ch Isolated Universal Input/Output Modbus TCP Module
• 6 differential channels • 16-bit effective resolution • Isolation Voltage: 2,000 VDC • Provides default/customized web pageSampling Rate: 10 samples/sec
Display |
LED Indicators |
Status, Comm, Link, Speed |
Power Supply |
Power Requirement |
10~30 VDC |
Analog Input |
Channels |
6 differential |
Voltage Range |
±10 V |
Current Input |
0~20 mA 4~20 mA |
Channel Independent Configuration |
Yes |
Sampling Rates |
10 samples/second |
Resolution |
16-bit |
Input Impedance |
20 MOhm |
Span Drift |
±25 ppm/°C |
Zero Drift |
±6 µV/°C |
CMR @ 50/60 Hz |
90 dB |
NMR @ 50/60 Hz |
60 dB |
Analog Output |
Channels |
2 |
Voltage Range |
0~10 V |
Current Output |
0~20 mA 4~20 mA |
General |
Watchdog Timer |
System (1.6 second) & Communication (programmable) |
Connector |
1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power) |
Temperature (Operating) |
-10~70 °C (14~158 °F) |
Humidity |
20~95 %RH |
Temperature (Storage) |
-20~80 °C (-4~176 °F) |
Interface |
10/100Base-T(X) |
Peer-to-Peer |
Receiver Only |
GCL |
Receiver Only |
Isolation Protection |
2000 VDC |
Communication Protocol |
Modbus/TCP, TCP/IP, UDP, and HTTP |
Communication Speed |
Ethernet: 10/100Mbps |
Comm. Distance |
Ethernet: 100 m |
Digital Input |
Channels |
2 |
Input Voltage |
Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC |
Digital Output |
Channels |
2 Open collector to 30V, 100 mA max. load |
Power Dissipation |
300 mW for each module |
Datasheets
|
ADAM-6024 Datasheet |
18-ch Isolated Digital I/O Modbus TCP Module
• 12-ch DI, 6-ch DO, Ethernet-based smart I/O • Remote monitoring and control with mobile devices • Group configuration capability for multiple module setup • Flexible user-defined Modbus address
General |
Description |
18-ch Isolated Digital I/O Modbus TCP Module |
Display |
LED Indicators |
Status, Comm, Link, Speed |
Power Supply |
Power Requirement |
10~30 VDC |
General |
Watchdog Timer |
System (1.6 second) & Communication (programmable) |
Connector |
1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power) |
Temperature (Operating) |
-20 ~ 70°C (-4 ~ 158°F) |
Humidity |
20~95 %RH |
Temperature (Storage) |
-30 ~ 80°C (-22 ~ 176°F) |
Interface |
10/100Base-T(X) |
Peer-to-Peer |
Yes |
GCL |
Yes |
Isolation Protection |
2000 VDC |
Communication Protocol |
Modbus/TCP, TCP/IP, UDP, and HTTP |
Communication Speed |
Ethernet: 10/100Mbps |
Comm. Distance |
Ethernet: 100 m |
Digital Input |
Channels |
12 |
Input Voltage |
Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 3 VDC max. Logic level 1: 10~30 VDC |
Digital Output |
Channels |
6 (Sink type) Open collector to 30V, 100 mA max. load Support 5 kHz pulse output |
Datasheets
|
ADAM-6050 Datasheet |
14-ch Isolated Digital I/O Modbus TCP Module with 2-ch Counter
• 12-ch DI, 2-ch DO, 2-ch counter, Ethernet-based smart I/O • Remote monitoring and control with mobile devicesRemote monitoring and control with mobile devices • Group configuration capability for multiple module setup • Flexible user-defined Modbus addressFlexible user-defined Modbus address
Display |
LED Indicators |
Status, Comm, Link, Speed |
Power Supply |
Power Requirement |
10~30 VDC |
Digital I/O |
Frequency Input |
2 independent counters (32-bit + 1-bit overflow, 0~4.5kHz) DI counters (32-bit + 1-bit overflow, 3kHz max.) |
General |
Watchdog Timer |
System (1.6 second) & Communication (programmable) |
Connector |
1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power) |
Temperature (Operating) |
-20 ~ 70°C (-4 ~ 158°F) |
Humidity |
20~95 %RH |
Temperature (Storage) |
-30 ~ 80°C (-22 ~ 176°F) |
Interface |
10/100Base-T(X) |
Peer-to-Peer |
Yes |
GCL |
Yes |
Isolation Protection |
2000 VDC |
Communication Protocol |
Modbus/TCP, TCP/IP, UDP, and HTTP |
Communication Speed |
Ethernet: 10/100Mbps |
Comm. Distance |
Ethernet: 100 m |
Digital Input |
Channels |
12 |
Input Voltage |
Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC |
Digital Output |
Channels |
2 (Sink type) Open collector to 30V, 100 mA max. load Support 5 kHz pulse output |
Datasheets
|
ADAM-6051 Datasheet |
16-ch Source-type Isolated Digital I/O Modbus TCP Module
• 8-ch DI, 8-ch DO, Ethernet-based smart I/O • Remote monitoring and control with mobile devices • Remote monitoring and control with mobile devices • Flexible user-defined Modbus address • Intelligent control ability by Peer-to-Peer and GCL function • Active I/O message by data stream or event trigger function • Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP • Web language support: XML, HTML 5, Java Script
Display |
LED Indicators |
Status, Comm, Link, Speed |
Power Supply |
Power Requirement |
10~30 VDC |
Digital I/O |
Frequency Input |
DI counters (32-bit + 1-bit overflow, 3kHz max.) |
General |
Watchdog Timer |
System (1.6 second) & Communication (programmable) |
Connector |
1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power) |
Temperature (Operating) |
-20 ~ 70°C (-4 ~ 158°F) |
Humidity |
20~95 %RH |
Temperature (Storage) |
-30 ~ 80°C (-22 ~ 176°F) |
Interface |
10/100Base-T(X) |
Peer-to-Peer |
Yes |
GCL |
Yes |
Isolation Protection |
2000 VDC |
Communication Protocol |
Modbus/TCP, TCP/IP, UDP, and HTTP |
Communication Speed |
Ethernet: 10/100Mbps |
Comm. Distance |
Ethernet: 100 m |
Digital Input |
Channels |
8 |
Input Voltage |
Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC |
Digital Output |
Channels |
8 (Source type) 10~35 VDC, 1 A per ch. Support 5 kHz pulse outpu |
Datasheets
|
ADAM-6052 Datasheet |
6-ch Digital Input and 6-ch Relay Modbus TCP Module
• 6-ch DI, 6-ch RL, Ethernet-based smart I/O • Remote monitoring and control with mobile devices • Group configuration capability for multiple module setup • Flexible user-defined Modbus address • Intelligent control ability by Peer-to-Peer and GCL function • Active I/O message by data stream or event trigger function • Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP • Web language support: XML, HTML 5, Java Script
Display |
LED Indicators |
Status, Comm, Link, Speed |
Power Supply |
Power Requirement |
10~30 VDC |
Digital I/O |
Frequency Input |
DI counters (32-bit + 1-bit overflow, 3kHz max.) |
General |
Watchdog Timer |
System (1.6 second) & Communication (programmable) |
Connector |
1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power) |
Temperature (Operating) |
-20 ~ 70°C (-4 ~ 158°F) |
Humidity |
20~95 %RH |
Temperature (Storage) |
-30 ~ 80°C (-22 ~ 176°F) |
Interface |
10/100Base-T(X) |
Peer-to-Peer |
Yes |
GCL |
Yes |
Isolation Protection |
2000 VDC |
Communication Protocol |
Modbus/TCP, TCP/IP, UDP, and HTTP |
Communication Speed |
Ethernet: 10/100Mbps |
Comm. Distance |
Ethernet: 100 m |
Digital Input |
Channels |
6 |
Input Voltage |
Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC |
Digital Output |
Channels |
6-ch relay Support pulse output |
Datasheets
|
ADAM-6060 Datasheet |
6-ch Digital Input and 6-ch Power Relay Modbus TCP Module
• 6-ch DI, 6-ch RL, Ethernet-based smart I/O • Remote monitoring and control with mobile devices • Group configuration capability for multiple module setup • Flexible user-defined Modbus address • Intelligent control ability by Peer-to-Peer and GCL function • Active I/O message by data stream or event trigger function • Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP • Web language support: XML, HTML 5, Java Script
Display |
LED Indicators |
Status, Comm, Link, Speed |
Power Supply |
Power Requirement |
10~30 VDC |
Digital I/O |
Frequency Input |
DI counters (32-bit + 1-bit overflow, 3kHz max.) |
General |
Watchdog Timer |
System (1.6 second) & Communication (programmable) |
Connector |
1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power) |
Temperature (Operating) |
-20 ~ 70°C (-4 ~ 158°F) |
Humidity |
20~95 %RH |
Temperature (Storage) |
-30 ~ 80°C (-22 ~ 176°F) |
Interface |
10/100Base-T(X) |
Peer-to-Peer |
Yes |
GCL |
Yes |
Isolation Protection |
2000 VDC |
Communication Protocol |
Modbus/TCP, TCP/IP, UDP, and HTTP |
Communication Speed |
Ethernet: 10/100Mbps |
Comm. Distance |
Ethernet: 100 m |
Digital Input |
Channels |
6 |
Input Voltage |
Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC |
Digital Output |
Channels |
6-ch power relay Support pulse output |
Datasheets
|
ADAM-6066 Datasheet |
|