داده پردازان هوشمند ایلیا

AC Inverter Drives

Basic Solution

Basic Solution

Basic Solution Our solution is designed to be compact and complete to a whole range of simple applications like conveyors, fans and pumps with small power ratings up to 7,5kW. New features like built in EMC Filter & RS485 modbus have been added to make these basic solutions easier to install and integrate into today's systems.

مشاهده اطلاعات...

General Purpose

General Purpose

این گروه با محدوده گسترده تا توان 300 کیلو وات و با گشتاوری راه اندازی بسیار عالی برای کنترل هر نوع دستگاه مناسب هستند. امکانات بسیار زیاد نظیر انواع کارتهای شبکه، درجه حفاظت های گوناگون، نرم افزارهای اختصاصی و ورودی و خروجی های استاندارد و سفارشی این مدل ها را به یکی از محبوب ترین اینورترهای دنیا تبدیل نموده است.

مشاهده اطلاعات...

Lift Applications

Lift Applications

The YASKAWA L1000A is a special purpose lift inverter drive designed for 3 Million starts at 165% output current. It provides advanced control functions to run induction and PM motor applications in geared or gearless elevator systems.

مشاهده اطلاعات...

Textile

Textile

The T1000A is the high performance vector control AC Drive specially developed for textile applications. Special hardware and software features make this inverter drive specifically adapted to the needs of the textile industries.

مشاهده اطلاعات...

Pump & Fan Solution

Pump & Fan Solution

The E1000 is the high performance vector control AC Drive specially developed for textile applications.

مشاهده اطلاعات...

Interesting to know

شرکت Omron مدل دیگری از کنترل کننده های دما با قابلیت نصب بر روی ریل و ترمینال های قابل جدا شدن را ارائه نمود. ادامه مطلب...

Basic Solution

200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity

One Machine Software

The J1000 meets all automation requirements for compact applications with variable speed operation and energy saving characteristics. A wide range of useful functions upgrade your machine and offer great potentials.
Features

    • Stall Prevention Functions for stable operation during changes of load or power supply
    • Over-Excitation Braking for quick deceleration without external braking resistor


  • 0.1kW to 1.5kW
  • 0.1kW to 4.0kW
  • 0.2kW to 4.0kW
  • Simple speed control
  • V/F control
  • 150% at 3 Hz
  • Memobus

Basic Solution

200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity

One Machine Software

The J1000 meets all automation requirements for compact applications with variable speed operation and energy saving characteristics. A wide range of useful functions upgrade your machine and offer great potentials.
Features

    • Stall Prevention Functions for stable operation during changes of load or power supply
    • Over-Excitation Braking for quick deceleration without external braking resistor


  • 0.1kW to 4.0kW
  • 0.1kW to 15kW
  • 0.2kW to 15kW
  • High speed accuracy and high starting torque for compact general purpose
  • Open loop for Vector and Open and Speed feedback for V/F control
  • 150% at 0.6 Hz
  • Memobus, DeviceNet, Profibus, CANopen, CompoNet, LONworks

General Purpose

200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity

One Machine Software

The J1000 meets all automation requirements for compact applications with variable speed operation and energy saving characteristics. A wide range of useful functions upgrade your machine and offer great potentials.
Features

    • Stall Prevention Functions for stable operation during changes of load or power supply
    • Over-Excitation Braking for quick deceleration without external braking resistor


  • 0.1kW to 4.0kW
  • 0.1kW to 15kW
  • 0.2kW to 15kW
  • High speed accuracy and high starting torque for compact general purpose
  • Open loop for Vector and Open and Speed feedback for V/F control
  • 150% at 0.6 Hz
  • Memobus, DeviceNet, Profibus, CANopen, CompoNet, LONworks

General Purpose

200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity

One Machine Software

The J1000 meets all automation requirements for compact applications with variable speed operation and energy saving characteristics. A wide range of useful functions upgrade your machine and offer great potentials.
Features

    • Stall Prevention Functions for stable operation during changes of load or power supply
    • Over-Excitation Braking for quick deceleration without external braking resistor


  • 0.1kW to 4.0kW
  • 0.1kW to 15kW
  • 0.2kW to 15kW
  • High speed accuracy and high starting torque for compact general purpose
  • Open loop for Vector and Open and Speed feedback for V/F control
  • 150% at 0.6 Hz
  • Memobus, DeviceNet, Profibus, CANopen, CompoNet, LONworks

Lift Applications

200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity

One Machine Software

The J1000 meets all automation requirements for compact applications with variable speed operation and energy saving characteristics. A wide range of useful functions upgrade your machine and offer great potentials.
Features

    • Stall Prevention Functions for stable operation during changes of load or power supply
    • Over-Excitation Braking for quick deceleration without external braking resistor


  • N/A
  • 4.0 kW to 45 kW
  • 4.0 kW to 75 kW
  • Lift control with asynchronous and synchronous motors
  • Open and close loop for Vector and V/F control
  • 200% at 0 Hz (CLV), 200% at 0.3 Hz (OLV)
  • RS-232C, RS-422/485(Memobus/Modbus), CANopen

Lift Applications

200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity

One Machine Software

The J1000 meets all automation requirements for compact applications with variable speed operation and energy saving characteristics. A wide range of useful functions upgrade your machine and offer great potentials.
Features

    • Stall Prevention Functions for stable operation during changes of load or power supply
    • Over-Excitation Braking for quick deceleration without external braking resistor


  • N/A
  • 5.5 kW to 15 kW
  • 4.0 kW to 15 kW
  • Lift control with asynchronous and synchronous motors
  • V/f Control Open Loop Vector (OLV)
  • 200% at 0 Hz (CLV), 200% at 0.3 Hz (OLV)
  • RS-232C

Textile

200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity

One Machine Software

The J1000 meets all automation requirements for compact applications with variable speed operation and energy saving characteristics. A wide range of useful functions upgrade your machine and offer great potentials.
Features

    • Stall Prevention Functions for stable operation during changes of load or power supply
    • Over-Excitation Braking for quick deceleration without external braking resistor


  • N/A
  • 0.55 kW to 110 kW
  • 0.55 kW to 185 kW
  • Lift control with asynchronous and synchronous motors
  • V/f Control,Open Loop Vector (OLV),Closed Loop Vector (CLV),Open Loop Vector (OLV) for PM,Adv. Open Loop Vector (OLV) for PM,Closed Loop Vector (CLV) for PM
  • Standard
  • RS-232C RS-422/485 (Memobus/Modbus)

Textile

200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity

One Machine Software

The J1000 meets all automation requirements for compact applications with variable speed operation and energy saving characteristics. A wide range of useful functions upgrade your machine and offer great potentials.
Features

    • Stall Prevention Functions for stable operation during changes of load or power supply
    • Over-Excitation Braking for quick deceleration without external braking resistor


  • 0.1 kW to 3.0 kW
  • 0.55 kW to 18.5 kW
  • 0.2 kW to 18.5 kW
  • Lift control with asynchronous and synchronous motors
  • V/f Control,Open Loop Vector (OLV),Open Loop Vector (OLV) for PM
  • No
  • RS-232C RS-422/485 (Memobus/Modbus)

Pump & Fan Solution

200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity

One Machine Software

The J1000 meets all automation requirements for compact applications with variable speed operation and energy saving characteristics. A wide range of useful functions upgrade your machine and offer great potentials.
Features

    • Stall Prevention Functions for stable operation during changes of load or power supply
    • Over-Excitation Braking for quick deceleration without external braking resistor


  • 0.1 kW to 3.0 kW
  • 0.55 kW to 18.5 kW
  • 0.2 kW to 18.5 kW
  • Lift control with asynchronous and synchronous motors
  • V/f Control,Open Loop Vector (OLV),Open Loop Vector (OLV) for PM
  • No
  • RS-232C RS-422/485 (Memobus/Modbus)

کپی رایت © شرکت داده پردازان 2013. همه حقوق محفوظ است.

dadehpardazan.ir
dadehpardazan.ir
dadehpardazan.ir