ProductsInteresting to know![]() Compact PLC SeriesMaximum digital I/O points
Execution time. (bit instructions)
Program memory
Data memory
Special functions
Communications
The economic machine controller
SpecificationsNote: The CP1E E-type has no real-time clock and therefore no battery. The N/NA-type has one optional battery for the real-time clock. Accessories
Downloads
Manual
Brochure
Datasheets
Compact PLC SeriesMaximum digital I/O points
Execution time. (bit instructions)
Program memory
Data memory
Special functions
Communications
Best in class compact machine controller
Compact PLC SeriesMaximum digital I/O points
Execution time. (bit instructions)
Program memory
Data memory
Special functions
Communications
Fastest compact machine controller
Modular PLC SeriesMaximum I/O capacity
Execution time (bit instructions)
Program memory
Data memory
Special functions
Communications
The entry-level modular PLC with a big potential
Modular PLC SeriesMaximum I/O capacity
Execution time (bit instructions)
Program memory
Data memory
Special functions
Communications
Integrated Loop Control and Sequence Control
Modular PLC SeriesMaximum I/O capacity
Execution time (bit instructions)
Program memory
Data memory
Special functions
Communications
CJ2M for basic machine automation
Rack PLC SeriesMaximum digital. I/O points
Execution time. (bit instructions)
Program memory
Data memory
Special functions
Communications
Suitable for any job: the rack-based PLC with over 200 types of I/O units
Rack PLC SeriesMaximum digital. I/O points
Execution time. (bit instructions)
Program memory
Data memory
Special functions
Communications
The dual-redundant PLC system for never-fail control
NJ3Description
Integrated safety into machine automation The Sysmac automation platform integrates the safety solution within our one connection and one software concept. One connection is realised though the use of Safety over EtherCAT - FSoE - protocol. The one software is achieved by using the Sysmac Studio for configuration, programming and maintenance. The NX safety system consists of safety controller and safety I/O units. Both the safety controller and safety I/O can be freely distributed in an I/O rack throughout the network, mixing them in any combination with standard NX I/O.
NJ5Description
One Machine Software Created to give you complete control over your automation system, Sysmac Studio integrates configuration, programming and monitoring in a simple interface. This advanced tool drives the powerful new NJ-series machine automation controller giving you total control of the entire machine with one single and easy to use software. Network configuration, motion control, sequencing, machine monitoring and simulation are some of the key features integrated into the Sysmac Studio software package. One software to control and configure the entire machine with a single connection gives you the power and efficiency to develop and create like never before.
Basic Solution200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity
The basic inverter
Downloads
Documents
Basic Solution200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity
Compact Vector Control Inverter Drive
Downloads
Documents
General Purpose200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity
Compact Vector Control Inverter Drive
Downloads
Documents
General Purpose200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity
The basic inverter
Downloads
Documents
Lift Applications200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity
The basic inverter
Downloads
Documents
Lift Applications200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity
The basic inverter
Downloads
Documents
Textile200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity
The basic inverter
Downloads
Documents
Textile200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity
The basic inverter
Downloads
Documents
Robust Remote I/O ModulesNumber of channels
Input
Output
Resolution
Sampling Rates
Communication Protocol
Counter Input
Robust 8-ch Analog Input Module with Modbus
Specifications
Robust Remote I/O ModulesNumber of channels
Input
Output
Resolution
Sampling Rates
Communication Protocol
Counter Input
Robust 8-ch Thermocouple Input Module with Modbus
Specifications
Robust Remote I/O ModulesNumber of channels
Input
Output
Resolution
Sampling Rates
Communication Protocol
Counter Input
Robust 15-ch Digital I/O Module with Modbus
Specifications
Robust Remote I/O ModulesNumber of channels
Input
Output
Resolution
Sampling Rates
Communication Protocol
Counter Input
Robust 8-ch Relay Output Module with Modbus
Specifications
Controller ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Communication Protocol
Communication Speed
Communication Distance
Counter Input
PC-based Communication Controller
Specifications
Controller ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Communication Protocol
Communication Speed
Communication Distance
Counter Input
Ethernet-enabled Communication Controller with 8-ch DI/O
Specifications
Controller ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Communication Protocol
Communication Speed
Communication Distance
Counter Input
Ethernet-enabled Communication Controller with 2-ch AI/O and 4-ch DI/O
Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
1-ch Thermocouple Input Module
Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
1-ch RTD Input Module
Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
6-ch RTD Module with Modbus
Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
6-ch Thermistor Module with Modbus
Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
6-ch Thermistor Module with Modbus
Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
8-ch Analog Input Module with Modbus Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
8-ch Analog Input Module with Modbus Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
8-ch Thermocouple Input Module with Modbus Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
8-ch Universal Analog Input Module with Modbus Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
1-ch Analog Output Module
Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
2-ch Serial Based Dual Loop PID Controller with Modbus
Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
4-ch Analog Output Module with Modbus
Specifications
Modular PLC SeriesMaximum I/O capacity
Execution time (bit instructions)
Program memory
Data memory
Special functions
Communications
CJ2H for high speed, high capacity
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
15-ch Digital I/O Module
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
16-ch Isolated Digital Input Module with Modbus
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
8-ch Isolated Digital Input Module
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
16-ch Digital Input Module
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
16-ch Isolated Digital I/O Module with Modbus
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
12-ch Sink Type Isolated Digital Output Module with Modbus
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
12-ch Source Type Isolated Digital Output Module with Modbus
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
4-ch Relay Output Module
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
8-ch Relay Output Module with Modbus
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
8-ch Power Relay Output Module with Modbus
Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
7-ch Isolated RTD Input Modbus TCP Module
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
2-ch Counter/Frequency Module
Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
8-ch Isolated Thermocouple Input Modbus TCP Module with 8-ch DO
Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
12-ch Isolated Universal Input/Output Modbus TCP Module
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
18-ch Isolated Digital I/O Modbus TCP Module
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
14-ch Isolated Digital I/O Modbus TCP Module with 2-ch Counter
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
16-ch Source-type Isolated Digital I/O Modbus TCP Module
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
6-ch Digital Input and 6-ch Relay Modbus TCP Module
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
6-ch Digital Input and 6-ch Power Relay Modbus TCP Module
Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
8-ch Isolated Analog Input EtherNet/IP Module
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
15-ch Isolated Digital I/O EtherNet/IP Module
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
16-ch Isolated Digital Input EtherNet/IP Module
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
16-ch Isolated Digital Output EtherNet/IP Module
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
6-ch Relay Output EtherNet/IP Module
Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
8-ch Isolated Analog Input PROFINET Module
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
16-ch Isolated Digital Input PROFINET Module
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
16-ch Isolated Digital Output PROFINET Module
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
6-ch Relay PROFINET Module
Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
4-ch Isolated Analog Output PROFINET Module
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input
15-ch Isolated Digital I/O PROFINET Module
Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Resolution
Analog Output
Sampling Rates
Communication Protocol
Counter Input
Outdoor Range
Topologies
Battery Input
Frequency Band
Modulation Type
Channels
RF Data Rate
Transmit Power
Wireless 6-ch Analog Input Node with Power Amplifier
Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Resolution
Analog Output
Sampling Rates
Communication Protocol
Counter Input
Outdoor Range
Topologies
Battery Input
Frequency Band
Modulation Type
Channels
RF Data Rate
Transmit Power
Wireless Temperature & Humidity Sensor Node
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Connector
Communication Protocol
Counter Input
Outdoor Range
Topologies
Battery Input
Frequency Band
Modulation Type
Channels
RF Data Rate
Transmit Power
Wireless 8-ch Digital Input Nodee
Specifications
Digital I/O ModulesPower Supply
Digital Input
Digital Output
Connector
Communication Protocol
Counter Input
Outdoor Range
Topologies
Battery Input
Frequency Band
Modulation Type
Channels
RF Data Rate
Transmit Power
Wireless 8-ch Digital Input Node with Power Amplifier
Specifications
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
1-ch Thermocouple Input Module
SpecificationsAnalog input modules use a microprocessor-controlled integrating A/D converter to convert sensor voltage, current, thermocouple, or RTD signals into digital data. The digital data is then translated into either engineering units, twos complement hexadecimal format or percentage of full-scale range (FSR)according to the module ’s configuration. When prompted by the host computer, the data is sent through a standard RS-485 interface. The Analog Input Modules offer signal conditioning, A/D conversion, ranging, and RS-485 digital communication functions. They protect your equipment from ground loops and power surges by providing opto-isolation of the A/D input and transformer based isolation up to 3000 V DC . (ADAM-4011 has transformer-based isolation up to 500 V DC )
Analog I/O ModulesPower Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input
8-ch Analog Input Module Specifications
24 VDCInput rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32
Single-phase switching power supply 120-230 Vac output power 15 W
Accessories* Mounting rail type according to IEC60715/TH35-7.5: PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB
* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB: -
12 VDCInput rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32
Single-phase switching power supply 120-230 Vac output power 15 W
Accessories* Mounting rail type according to IEC60715/TH35-7.5: PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB
* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB: -
24 VDCInput rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32
Single-phase switching power supply 120-230 Vac output power 15 W
Accessories* Mounting rail type according to IEC60715/TH35-7.5: PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB
* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB: -
5~15 VDCInput rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32
Single-phase switching power supply 120-230 Vac output power 15 W
Accessories* Mounting rail type according to IEC60715/TH35-7.5: PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB
* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB: -
+-12 ~ +-15 VDCInput rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32
Single-phase switching power supply 120-230 Vac output power 15 W
Accessories* Mounting rail type according to IEC60715/TH35-7.5: PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB
* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB: -
12~15VDCInput rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32
Single-phase switching power supply 120-230 Vac output power 15 W
Accessories* Mounting rail type according to IEC60715/TH35-7.5: PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB
* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB: -
24 VDCInput rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32
Single-phase switching power supply 120-230 Vac output power 15 W
Accessories* Mounting rail type according to IEC60715/TH35-7.5: PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB
* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB: -
24 VDCInput rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32
Single-phase switching power supply 120-230 Vac output power 15 W
Accessories* Mounting rail type according to IEC60715/TH35-7.5: PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB
* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB: -
10~15VDCInput rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32
Single-phase switching power supply 120-230 Vac output power 15 W
Accessories* Mounting rail type according to IEC60715/TH35-7.5: PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB
* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB: -
+-12 ~ +-15 VDCInput rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32
Single-phase switching power supply 120-230 Vac output power 15 W
Accessories* Mounting rail type according to IEC60715/TH35-7.5: PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB
* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB: -
24 VDCInput rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32
Single-phase switching power supply 120-230 Vac output power 15 W
Accessories* Mounting rail type according to IEC60715/TH35-7.5: PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB
* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB: -
Winlog ProMulti-language
Modbus Protocol
OPC Client interface
ODBC support
Client/Server architectures
Web Server support
Drivers
Winlog Pro is a flexible, convenient and easy-to-use software package for the development of SCADA/HMI applications with a Web Server support. An integrated development environment provides a set of tools for the easy and intuitive creation of multi-language applications. Development tools include the popular libraries Symbol Factory 2.5 (static graphical symbols) and Industrial Gadgets ActiveX (animated graphical objects). An extensive library of drivers supports most communication protocols (OPC, Siemens, Omron, Allen Bradley, Modbus RTU, Modbus TCP, KNX, etc.) with electronic devices such as PLCs, controllers, indicators, etc. History files in CSV format and ODBC support provide an interface to the most common Windows applications (Excel, SQL, etc.). There is a simple programming language that allows application enhancement and easy customization. Winlog Pro makes it possible to set up distributed Client/Server architectures on Intranet/Internet networks or to create web applications accessible from Internet Clients with a simple browser.
FeaturesMain Features
Graphic LibrariesDevelopment tools include Symbol Factory 2.5, the popular library of graphic symbols for industrial automation with over 5,000 manufacturing and industrial objects such as pumps, valves, motors, tanks, PLCs, piping, ISA symbols, etc; an integrated editor allows resizing and changing colour, scheme and orientation of objects (bitmap or metafile).
Development tools also include two libraries of animated graphic objects: Industrial Gadgets ActiveX Basic Edition, with animated objects both digital (buttons, switches, leds) and numeric (pointer indicators, potentiometrs, led displays) and Industrial Gadgets ActiveX PRO Edition, with complex animated objects such as motors, pumps, valves, tanks, pipes.
Client/Server Architectures & Web Server SupportDistributed Client/Server architectures can be set up on Intranet/Internet networks; several Winlog Pro applications installed on remote stations can communicate to each other via a TCP/IP protocol. Multi-master structures can be defined so as to allow both reading and writing between the various stations.
It is also possible to create supervisory applications with a Web Server support, hence accessible from any Internet Client with a simple browser. Two different solutions are provided to allow you to access the Server application: Web Client solution to access the Server from fix devices supporting Java technology, and Smart Client solution to access the Server from mobile devices such as Smartphones and Tablets equipped with iOS, Android or Windows Phone.
Graphical TrendsTrends give a graphical representation of monitored and recorded tags over time. It is possible to display simultaneously up to 10 trends relating to tags of different types, each with its own colour and scale. Various display options are available for trends (grid, line thickness, type of interpolation), backgrounds (colour, font) and positioning of the various elements (legend, buttons, cursor coordinates). It is possible to shift backwards and forwards the time axis, change scale, zoom the image or display the values of all tags plotted according to time coordinates.
Events & AlarmsEvents and alarms are types of gates activated or deactivated in relation to the value of an associated reference tag. A dedicated area of the screen allows an instantaneous display of alarms. Access to online information (active or not managed events) and historical (event beginning and end) is organized according to different freely assignable classes (e.g. priority, location, capability). In addition to date and time, any event can be associated with the value of multiple gates in order to provide a picture of the state of the system at the time of the onset of the event. Simple code routines allow sending of emails or SMSs on the occurrence of particular events.
RecipesRecipes are sets of characteristic values of a particular working process or a specific setting of the machine. It is possible to create several recipe models, each of which refers to a set of process variables (gates). Variables can be grouped together to allow application of joint actions. For every recipe model, it is then possible to create several recipes, each of which is made of a set of values assigned to the process variables defined in the recipe model. You can create, rename or delete both recipes and recipe models. You can also create new recipes by importing values directly from the process. You can send a recipe to the process manually (on operator request) or automatically (on software start-up), or following a trigger condition (e.g. in batch processes).
ReportsReports contain a collection of historical information (production data, process quality, alarms) to be directly examined by production managers or imported and processed later by other Windows applications (e.g. Excel). In the first case reports are explanatory documents, drawn up in a predefine format, available on screen, printed or saved on disk as pdf files. In the second case, reports consist of files in a CSV format with data records registered at predefined time intervals. Reports can be either requested by the operator, or automatically generated on a cyclic basis (time interval, day of the week, etc.), or triggered by a specific condition (e.g. production end).
SecurityEach menu item, template, tag, etc., can be protected assigning the groups authorized to access it and those who can modify it. A name, password, and membership of one or more groups can then be defined for an unlimited number of operators. Every operator's action that has produced a data modification is recorded in a history file by date, time, event description and operator's name. This makes it possible to determine the causes of any irregularity in the operation of the system resulting from an operator action. Ordering infoW-NET DEVELOPMENT LICENSES
W-R RUNTIME LICENSES
W-RW WEB RUNTIME LICENSES
NJ18-ch Analog Input Module Sysmac controller – NJ1 Series The NJ1 series is a new Sysmac controller for logic sequence and motion control aimed for compact machines.
• Fastest cycle time: 1 ms • Number of axes: 2 • Synchronized motion core • Functions: Logic sequence, Motion and Database connection • Database direct connection in V2.0 is expanded with stored procedure calls and secure communications functionality • Database direct connection: SQL client for server Microsoft SQL, Oracle, IBM DB2, MySQL, Firebird, PostgreSQL • Multi-tasking • Built-in EtherCAT and EtherNet/IP ports • DB connection: SQL client for Microsoft SQL server, Oracle, IBM DB2, MySQL, Firebird • EtherCAT Ring topology is supported to maintain communications and control in case of a broken cable or device failure
NJ18-ch Analog Input Module Sysmac controller – NJ1 Series The NJ1 series is a new Sysmac controller for logic sequence and motion control aimed for compact machines.
• Fastest cycle time: 1 ms • Number of axes: 2 • Synchronized motion core • Functions: Logic sequence, Motion and Database connection • Database direct connection in V2.0 is expanded with stored procedure calls and secure communications functionality • Database direct connection: SQL client for server Microsoft SQL, Oracle, IBM DB2, MySQL, Firebird, PostgreSQL • Multi-tasking • Built-in EtherCAT and EtherNet/IP ports • DB connection: SQL client for Microsoft SQL server, Oracle, IBM DB2, MySQL, Firebird • EtherCAT Ring topology is supported to maintain communications and control in case of a broken cable or device failure
NJ18-ch Analog Input Module Sysmac controller – NJ1 Series The NJ1 series is a new Sysmac controller for logic sequence and motion control aimed for compact machines.
• Fastest cycle time: 1 ms • Number of axes: 2 • Synchronized motion core • Functions: Logic sequence, Motion and Database connection • Database direct connection in V2.0 is expanded with stored procedure calls and secure communications functionality • Database direct connection: SQL client for server Microsoft SQL, Oracle, IBM DB2, MySQL, Firebird, PostgreSQL • Multi-tasking • Built-in EtherCAT and EtherNet/IP ports • DB connection: SQL client for Microsoft SQL server, Oracle, IBM DB2, MySQL, Firebird • EtherCAT Ring topology is supported to maintain communications and control in case of a broken cable or device failure
NJ18-ch Analog Input Module Sysmac controller – NJ1 Series The NJ1 series is a new Sysmac controller for logic sequence and motion control aimed for compact machines.
• Fastest cycle time: 1 ms • Number of axes: 2 • Synchronized motion core • Functions: Logic sequence, Motion and Database connection • Database direct connection in V2.0 is expanded with stored procedure calls and secure communications functionality • Database direct connection: SQL client for server Microsoft SQL, Oracle, IBM DB2, MySQL, Firebird, PostgreSQL • Multi-tasking • Built-in EtherCAT and EtherNet/IP ports • DB connection: SQL client for Microsoft SQL server, Oracle, IBM DB2, MySQL, Firebird • EtherCAT Ring topology is supported to maintain communications and control in case of a broken cable or device failure
|
Copyright © Dadeh Pardazan Corporation 2020. All rights reserved.